EV Battery Design Can Charge in 10 Minutes
Nov. 4, 2019—Researchers from Penn State University say it may be possible to design electric vehicle batteries that charge in as little as 10 minutes, reports extremetech.com.
The standard set by the researchers for a sufficiently fast battery is 200 miles of range per 10 minutes of charging. That is possible without any new technology, as long as you don’t mind the battery deteriorating after a handful of charge cycles. The challenge is to create a high-capacity battery that can charge quickly and maintain its functionality for 2,500 cycles or more, reports extremetech.com.
The system described in the new study uses asymmetric charging—the battery is heated during charging and then cools when storing the charge. The goal is to heat the cells just past the point where lithium plating can form.
The test batteries were charged with the internal temperature calibrated to 40, 49, and 60 degrees Celsius. A control battery was maintained at 20 degrees Celsius. The 60-degree electrode lasted through 2,500 cycles of super-fast charging without accumulating the plaque that would hamper cooler cells. With internal heating, the battery would also work equally well no matter the climate, according to coauthor Xiao-Guang Yang.
Yang says the next step is to see if they can push the charging speed time to just five minutes. That would put it in the same ballpark as refilling a gasoline car.